Start a tab

Every Hardware Pedal & Modeller That Supports NAM A2 (Updated Monthly)

Neural Amp Modeler Architecture 2 (A2) changed the game for hardware modellers. While the original A1 WaveNet models were too CPU-heavy for most affordable multi-effects units without lossy file conversion, NAM A2 cuts processing demands by 30–40% while improving transient response and high-gain accuracy.

Because a single .nam A2 capture contains both A2-Full and A2-Lite weights inside the same file, hardware manufacturers—and even audio interfaces like the Heritage i73 Pro—can now run native neural captures on everything from flagship floorboard workstations to budget units.

Below is the complete, up-to-date tracker of every guitar and bass pedal, desktop amp, and modeller running NAM A2—broken down by which tier they actually support.

A2-Full vs. A2-Lite vs. Conversion: What Your Pedal Runs

Before buying a modeller for NAM, check which tier its DSP chip supports:

  • A2-Full (Maximum Studio Accuracy): Built for desktop DAWs and high-powered multi-core hardware. Delivers lower error rates than A1-Standard while using roughly a third less CPU.
  • A2-Lite (Native Embedded Hardware): Engineered specifically for 600 MHz ARM Cortex-M7 chips found in modern multi-FX pedals and practice amps. Runs natively without external file conversion and still outperforms commercial closed-source profilers in blind listening tests.
  • A1/A2 Conversion (Downscaled): Older hardware that lacks the DSP overhead to run .nam files natively. Companion software re-renders the capture into a proprietary format (such as Valeton SnapTone), which works well for gigs but sacrifices slight dynamic nuance.

Complete List of NAM A2 Supported Hardware

Brand & ModelA2 Tier SupportedDirect TONE3000 Sync?Notes & Firmware Status
Dimehead NAM PlayerA2-FullUSB / Flash DrivePurpose-built hardware NAM loader with near-zero latency (~0.5ms) and full A1 backward compatibility.
Darkglass AnagramA2-Full & A2-LiteYes (Native API)KosmOS 1.17+ runs up to 5 A2-Full or 9 A2-Lite captures simultaneously for parallel bass rigs.
HeadRush Prime / Core / Flex PrimeA2-FullYes (Built-in Wi-Fi)Firmware 5.1+ supports drag-and-drop .nam files and direct Wi-Fi browsing of TONE3000.
Sonulab StompStation ProA2-FullUSB / AppRuns up to three A2-Full instances concurrently.
Fractal Audio Axe-Fx IIIA2-FullYes (Integration)Official TONE3000 & NAM A2 integration rolled out in late 2026.
Blackstar ID:X Floor (One, Two, Three)A2-LiteYes (TONE3000)Free November 2026 firmware update unlocks native A2 capture browsing and loading across the entire ID:X Floor range.
ZOOM NEURIGA2-Lite / CaptureYes (TONE3000)Dedicated NAM-focused multi-FX pedal that loads TONE3000 captures and trains A2 profiles.
Hotone Ampero II / Stage / StompA2-LiteUSB / EditorNative A2-Lite playback alongside Hotone’s built-in delay, reverb, and modulation blocks.
MOOER GE1000 / GS1000 / GE300A2-LiteUSB / EditorSupported via the July 2026 firmware update (including the battery-powered GE1000 Li and GE100 Pro Li).
NUX Trident / MG-30 / MG-50Li / MG-400A2-LiteUSB / EditorBrings native A2-Lite capture playback to the sub-$250 multi-FX market.
Valeton GP-200 / GP-5 / GP-150ConversionUSB / EditorCurrently downscales captures into SnapTone format during import rather than running native A2 weights.

Can Your Old A1 Captures Still Load on A2 Hardware?

Yes. NAM A2 is backward-compatible with older A1 captures—meaning your existing library of A1-Standard and A1-Lite .nam files will continue to load on A2-enabled pedals and plugins without issue.

However, the reverse is not true: A2 files will not load on older A1-only firmware. If you download a newly trained A2 capture from TONE3000 and your pedal throws a file error, check your manufacturer’s site for an A2 firmware update first.

More NAM Tests, Captures & Free Plugins

More like this